Collapsible Camping Chair Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for a collapsible camping chair made of 16 mm rods
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A collapsible camping chair needs a replacement part, because the original plastic broke.
Lucky for me, I found the repair-of-collapsible-camping-chair by @Tritschi and printed it mirrored. Unfortunately, those chairs are very specialized. Even though the original part could be rotated and may have worked for both sides, the reenforced version by Tritschi does not work for both sides.
Therefore, I took the ideads from his model and remodelled the part in onshape for the right connector. (If you sit on it: under your left knee).
Print Instructions
Print in PETG with 4 perimeters and infill > 30 %.
Parts needed
Two M4 x 30 mm
Two self locking M4 nuts (In the picture are usual screws for a first try)
Modifications welcome
Here is my onshape document with the sources: