Pavo35 spare parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
spare part for the Pavo35 drone frame
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are a few 3D models I designed for the Pavo35 frame.
To use them properly, you may need a few additional parts:
Anti-jello rubbers – https://www.aliexpress.com/item/1005004834430551.html?
M2 OD3.5 melting nuts (for the antenna holder) – https://www.aliexpress.com/item/1005003582355741.html?
M1.6x16 screws (for HDZero VTX) – https://www.aliexpress.com/item/1005002111095663.html?
Buzzer – https://www.aliexpress.com/item/32948360045.html?
Note:
Zip ties on the anti-jello rubbers help reduce camera shake and also keep the camera from flying out in a crash. Tighten them just enough to hold—too tight, and you'll bring the jello back.
As you can see in the photos, the VTX is mounted through the corner holes in its case. Be aware that the mounting hole positions aren't perfectly square—just slightly off. (HDZero devs really like to do things their own way.)
If you prefer, you also can mount a buzzer instead of the power plug.
Updates:
– added VTX plate for the standard mounting size 25.5×25.5
– added receiver holder V2