1 / 1
Sea Frogs SF-TG6 Zoom Lever
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zoom Lever replacement for the camera case
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
The zoom lever on a friends camera broke so I designed and printed a new one.
My design doesn't match the original part 100% but provides the same function.
I've split it into two parts that need to be put together, but no glue is required as everything will be held together inside the case.
The lever with wide opening is an alternative I designed but didn't need. It was intended to be used in case that the opening is too small for grabbing the zoom switch on the camera.
