Garden Hose Hanger (fusion360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little hanger that connects to the end of your garden hose to allow you to hang it where you want.
- Ocena
- 5 / 5
- Polubienia
- 128
- Pobrania
- 267
- Wydruki
- 4
- Wyświetlenia
- 1571
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
When storing your garden hose, often the end floats about or lies on the ground resulting in a water puddle when the water comes out of it. A good way to solve this issue is to hang your hose upright, but it can be a struggle to hold it in position. This little hanger piece plugs securily into the end of your hose and has holes for you to easily hang it where you like (with for example, a string). Since water won't flow out if hung upright, the hanger contains a hole for ventilation and water evaporation.
Printing information:
- Print the model on its tip
- No supports are needed
- Use a brim to increase adhesion to the printbed
- As the model will be in contact with water, I recommend using non porous materials like PETG or ASA to print it