Ferrex Lawnmower Fuel Tank Cap with Valve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fuel tank cap for a Ferrex lawnmower. Use PETG for the main body. A TPU valve for gas exchgange is included.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
This is a fuel tank cap for some Ferrex lawnmowers.
It comes with a one way valve to allow air to get inside the tank while preventing fuel from spilling out when the lawnmower is flipped for cleaning.
The main body should be printed from PETG as it is more resistant to gasoline than PLA, ABS or ASA. Nylon is also an option.
The valve sheet should be printed with somewhat soft TPU. Make sure that the particular TPU you are using is also resistant to non-polar organic solvents beforehand by submerging a small piece of the filament in gasoline for a day or so and checking for changes.
I printed mine on an Anycubic Kobra S1 with default settings other than a 0.15 mm layer height and using no support material. Slower print speed might be beneficial though.