1 / 4
Sovol SV08 Buildplate Stop for Silicone Bed Taco Fix — zdjęcie 1
1 / 4

Sovol SV08 Buildplate Stop for Silicone Bed Taco Fix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Buildplate stop to compensate for the height of silicone spaces added under the aluminium bed to fix the taco bed

Ocena
0 / 5
Polubienia
16
Pobrania
48
Wydruki
0
Wyświetlenia
939
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I have modified the original model because after printing it it did not fit on my machine.

Upon overlaying the model on the bed data I found that it would not fit the magnetic sheet without trimming the corner. 

So I made this one that fits with the stock sheet and stock buildplate. It attaches without any fixing, it just clips. You can use extra glue or screws if you deem neccesary, I left the hex from the original model.

I printed in ASA, looks fine for the moment. I would re-print in PC-CF if this does not hold up.

Unfortunatelly it only works with a Z pressure probe delete, I am not using it at all so I removed it.

My silicone spacers are 6mm high(I tried loosing as little as possible from Z height), the stoppers are about 1.3 mm higher that the build plate with the bed level already adjusted.

I am also adding the .stp file so you can change the height if you used other spacers. If you don't have modelling knowledge and want me to make a higher version please let me know.

If there are requests for the version with the probe still in place I might model that also, let me know.

Tagi