1 / 12
Arduino GIGA R1 WiFi & Display Shield Case with Optional Pin Access — zdjęcie 1
1 / 12

Arduino GIGA R1 WiFi & Display Shield Case with Optional Pin Access

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sturdy two-part case for the Arduino GIGA R1 WiFi board with official GIGA Display Shield. Includes optional bottom part

Ocena
5 / 5
Polubienia
8
Pobrania
229
Wydruki
1
Wyświetlenia
884
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This 3D-printed enclosure is specifically designed for the Arduino GIGA R1 WiFi board together with the official GIGA Display Shield. It consists of a top and bottom shell that are securely fastened using four M3 x 25 mm screws and four M3 nuts.

A key design feature is the shadow gap between the upper and lower halves. This not only gives the case a clean, modern look but also helps to compensate for 3D printing tolerances, resulting in a better fit.

Two versions of the bottom part are included:

A closed version for a clean appearance and maximum protection

An open version with a cutout for full access to the Arduino GIGA R1 I/O pins – perfect for prototyping and development

The case was printed successfully using PLA and fits tightly and securely. It’s ideal for makers and developers who want a clean and functional housing for their GIGA-based projects.

Tagi