RC Car Body Display Chassis - Perfect for 1/10 scale RC with 12MM Hubs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RC Car Body Display Chassis - Perfect for 1/10 scale RC with 12MM Hubs
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Neurotik -- the only difference is I have all the parts in one STL file with it laid out perfect for printing on a PRUSA i3 MRK3S+. The print layout includes multiple size arms for use on variable bodies.
You will need the following to assemble one chassis:
12x M3x16mm Thread Button Head Hex Bolts
12x M3 Hexagon Nuts
4x M4x16mm Thread Button Head Hex Bolts (used to put tires/rims on chassis - no nuts needed as they screw from the outside of the rim right into the assembled chassis)
I would recommend a felt or rubber pad to separate the chassis from the body as it will help it from sliding around or getting scratched.
