Baseball Bat Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A baseball bat hanger with three ways to hang, and the option to put text on the front using a slicer or other means.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to hang a baseball bat with the option to put text on the front like, Name, Initials or whatever. I designed it with some versatility so It could be used by others to put their kids game bats or their own bat on it if you want.
(As far as the lettering on the front, the model is blank. I used Orca slicer to add Raised initials to the front)
There are 3 back plates. Flat back for use with double sided tape. Through holes for front mount, and back holes for mounting from the back with screws. (I Printed Flat) Back screw holes can be printed with tree support if needed, and removed with a small pick.
Screws (need 2) I use regular support for these, with a .27mm on the top and bottom Z distance and they popped off with the supports still attached to the plate.
For break resistance, I used 50% Infill. 30% broke or cracked when I popped the bat on it.