1 / 1
TZ 2.0 + 6028 fan for Delta-P adapter for MK3s+ (Klipper) — zdjęcie 1

TZ 2.0 + 6028 fan for Delta-P adapter for MK3s+ (Klipper)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapt a TZ Hotend and 6028 fan to your MK3s+ with these files!

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
194
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Pushes at least 2-3x more air than the original cooling solution. Not flow tested or anything though. You will need a 6028 fan and two M3x35mm fasteners to mount it. The fan works on either 12/24v (instead of 5v) so you will need to be creative. I'm using this BTT MMB Cubic board which provides up to 3 selectable 5/12/24v fan outputs. I've since upgraded to a 32bit motherboard with 24v fan ports.

Adapt a TZ v6 Hotend to your MK3s+ with this modified extruder body and this modified Delta-P fan duct V2-R2 fan mount.

 

Here's a Benchy printed in 17m01s with Klipper and this combo:

Tagi