Sash Clamps Midium Size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed and 3D printed parts to build sash clamps for wood panel assembly
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 648
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Starting from the excellent design published here → https://www.prusaprinters.org/prints/63996-serre-joint-dormant, I designed my own with Fusion 360 adapted to wood size 30mm x 20mm and 8mm threaded shaft
After 1st print and test I made some changes/improvements on the design. Mainly for the handle and the mobile head. So now the head stays aligned with the wood and handle handle no longer unscrews when loosening
Printed in PLA YellowGreen from Filament PM and PLA Prusament Galaxy Black (For the handle) on my PRUSA MINI+, I used similar parameters as original parts → 7 perimeters / 7 solid layers / Honeycomb infill and 25% density
For assembly you'll need:
- 1 x 8mm threaded shaft / Long 100mm or more
- 4 x M8 nuts
- 2 x M8 washers
- 2 x M6x45 screws
- 2 x M6 nuts
- 5 x M6 washers
- Piece of wood 20mmx30mm / Long as you need
On top of .stl and .3mf files I uploaded Fusion 360 .f3d one so you can modify the design and adapt it to your needs
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes
Enjoy
If you like this model, take a look also at my other designs