1 / 9
Quetschventil für Gartenschlauch / Pinch valve for garden hose — zdjęcie 1
1 / 9

Quetschventil für Gartenschlauch / Pinch valve for garden hose

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reduce flow with pinch valve / Durchfluss reduzieren mit Quetschventil Simply slip it over / Einfach darüberstülpen

Ocena
5 / 5
Polubienia
51
Pobrania
340
Wydruki
3
Wyświetlenia
1137
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

→ DE:   Wenn der Wasserhahn zu weit weg ist und Sie den Durchfluss am Wasserschlauch reduzieren oder absperren möchten - dies ist eine einfache Möglichkeit - ohne den Schlauch abzuschneiden und ohne ein Ventil einzubauen - einfach über den Schlauch stecken!

Der Außendurchmesser des Schlauches ist 16mm, für andere Durchmesser können Sie den mit dem Dreisatz berechnen: Z.B.: Skalierung: (gewünschter Durchmesser/16mmx100%. Fotos: Das Exemplar auf den Fotos ist für 18mm Schlauch (Skalierung 112,5%). Wenn Sie es größer drucken funktioniert das genauso gut. Geben Sie etwas Fett auf das Gewinde.

Drucken Sie es in der Orientierung, wie in der STL-Datei, und aus dem Foto zu sehen. Layer 0,2mm; 3-5 Perimeter (nozzle 0,4mm), 20% infill. Ich hebe es mit PETG und 3 Perimeter gedruckt, PLA könnte evtl. auch funktionieren.

___________________________________________________________________________________________________

→ EN:   If the water tap is too far away and you want to reduce or block the flow of the water hose - this is an easy way - without cutting the hose and assemble a valve - just put it over the hose!

The outer diameter of the hose is 16mm, if you want to scale use the rule of three! E.G.: Scale: (Diameter, you want) / 16mm x 100%

Photos: The example in the photo is for hose with diameter 18mm (112.5%). If You print it larger it is not negativ! Grease the screw nut.

Easy to print, no support: Layer 0.2mm, 3-5 Perimeters (nozzle 0.4mm), 20% infill, print it in the shown orientation!  I used PETG and 3 perimeters, PLA should also work.

Please show me your result, Thank You

 

Tagi