Hue Dimmer Switch V2 Mount (EU - no additional hardware)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall plate mount for Hue Dimmer Switch v2 with 60mm screw hole distance that allows minor adjustments.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 88
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This mount fits the wall plate that comes with the Hue Dimmer Switch while still allowing you to access the original switch below. No additional hardware required, just remove the original wall plate frame, switch covers and screws. Screw on the printed wall plate mount, attach original switch covers and the Dimmer Switch plate. Screw hole distance is EU standard 60mm with some room for minor adjustment.
Print in PETG with 5 perimeters.
Three different clearances, 15mm worked for all of my switches but depending on your switch covers you might need the taller ones.