Riser ACE PRO drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
add-on for existing ACE PRO riser from Muflix
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 1672
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is only drawer for ACE PRO RISER by Muflix. Model only for ACE PRO RISER by Muflix can be found here. https://www.makeronline.com/en/model/Riser%20ACE%20PRO/175423.html
There are two drawer variants available: one with a 27mm depth and another with a 47mm depth.
The 27mm drawer is designed to allow storage of the upper panel and one PEI plate in the riser.
The 47mm drawer, on the other hand, prioritizes maximum storage space but does not accommodate a PEI plate or the upper panel in the riser.
Since the drawer is printed in a vertical (standing) position, I recommend printing at a lower speed to minimize vibrations, especially toward the end of the print. BTW enable bed leveling before starting your print.
The drawer prints as two separate pieces - the main body and the back panel - which simply press together for assembly.