Clutch lever for KTM/Husqvarna/Gas Gas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to fit my 2020 KTM 300 XC-W so cross reference to see if this would fit your bike.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 297
- Wydruki
- 1
- Wyświetlenia
- 922
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I printed the lever and adjuster in both PLA and PETG using the built in profiles in PrusaSlicer but with 50% infill. Both levers have worked well for test rides. I plan to do some trail riding to see how the lever holds up, but so far fit is exactly as my stock lever. You can adjust the lever using a 4mm hex key.
This lever is meant to be printed as a back up and probably not something I'd use for long periods of time unless printed out of something like Nylon or something. I plan to print a bunch and give them to my riding buddies to see how they hold up.