1 / 3
E3NG Printed Base Plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable base plate for the E3NG. It is printed and assembled in 4 parts, just like the back panel.
There are options for single and triple motor configurations.
To use this mod you will need to flip your motor so that they face down. You will need longer feet or the Mesh skirt mod to make them fit in this setup.
Flat Mesh Skirt with Wide Legs for Ender 3 NG by vervurax | Download free STL model | Printables.com
There are two sets of files: Standard and Scaled. The Scaled files are to compensate for ABS shrinkage. They are the standard files scaled to 100.2%. This is what worked for me, your results may vary.