Rockler Vacuum Pod MFT Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These attach the Rockler vacuum pods to an MFT (or any base with 20mm dog holes, 96mm on center).
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I wanted to be able to mount my Rockler Vac Pods to my Festool MFT and to a custom base I created for my Shaper Origin Station. I created a dovetail T-Track slot so it would print without supports. It utilizes the t-track holders that come with the Vac Pods. The through holes for the 8X1.25mm holddown bolts in the wings are 192mm on center, so the mount spans 3 dog holes. I already have a set of threaded dogs that can come up from the bottom of the table and secure the mount. I figured not everyone would have those, so I created a print file for the threaded dog, as well.
I printed these with 5 walls, 20% infill and Support Cubic infill pattern.
2025-10-24 Update: I have added 2 step files for remixes. I have also added the original Fusion 360 file. I don't recall how I got it. I think it was posted for free use on a CAD site. You will see the name “Benutzer” in the earlier parameters. I think that user gets attribution for the work before I took over this file. My additions are strictly the vac mount and the threaded star-dog that comes up from beneath the MFT.