Delphinus Air Ship

Delphinus Air Ship from the video game Skies of Arcadia.

Print instructions

I printed the model in the picture in the pictures at 0.20 mm resolution but you can print it in the 0.15 mm resolution.

I will list the info by the .stl file names.

These are just the settings I used and are to be used as a guide, feel free to use whatever settings you wish.

========================================

File: anchors.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: Yes (I used 2 layers)

NOTE: small parts remove with caution.

========================================
File: crows_nest.stl

Material: PLA

Layer height: 0.20 mm

Supports: Yes

Rafts: YES (I used 2 layers)

========================================

File: front_blade_fin.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: you will need to print 2 of each of the blades

========================================

File: main_cannon.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: Yes (I used 2 layers)

NOTE: you will need to print 4 of these,

I recommend on printing one at a time they seem to print better that way.

========================================

File: main_hull_L.stl

Material: PLA

Layer height: 0.20 mm

Supports: YES (its minor for the pin holes)

Rafts: No

NOTE: prints easy, has pin holes on bottom to align

with the other half.

========================================

File: main_hull_R.stl

Material: PLA

Layer height: 0.20 mm

Supports: YES (its minor for the pin holes)

Rafts: No

NOTE: prints easy, has pin holes on bottom to align

with the other half.

========================================

File: MSC_barrel.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: the barrel is separate so it can be printed in different colors if wanted
simple glue it to the nose_msc.stl it has a pin and a hole on the barrel.

========================================

File: nose.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: none

========================================

File: nose_MSC.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: none

========================================

File: pins.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: Yes (I used 2 layers)

NOTE: pins for the main hull and the turrets. you can use 1/8 metal pins as well.

========================================

File: propeller_pins.stl

Material: PLA

Layer height: 0.20 mm

Supports: Yes

Rafts: Yes (I used 2 layers)

NOTE: pins for the propellers, the larger end attaches it the the main hull.

========================================

File: propellers.stl

Material: PLA

Layer height: 0.20 mm

Supports: Yes

Rafts: Yes (I used 2 layers)

NOTE: none

========================================

File: wings.stl

Material: PLA

Layer height: 0.20 mm

Supports: Yes

Rafts: No

NOTE: none

========================================

File: stand.stl

Material: PLA

Layer height: 0.20 mm

Supports: No

Rafts: No

NOTE: none