26mm/1in Scotch Tape Adapter for Singh Design's Tape Dispenser Automatic Tape Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
smaller tape wheel and bearing that will support a 26mm diameter wheel of sticky tape
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 266
- Wydruki
- 2
- Wyświetlenia
- 1113
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
After printing Singh Design's Tape Dispenser Automatic Tape Cutter model, I realised that I could not fit my desired 26mm (1") Scotch tape roll on the original roller. This new wheel and psuedo-bearing replace the original wheel, and can be inserted without disassembly by unscrewing the rear pin and sliding them in before replacing the pin.
I printed mine with Maker Hero Paper White PETG on a Flashforge Adventurer 5M with 10% gyroid infill.
Please note this is just the adapter wheel and you will need to print Singh Design's original model (though you can omit the wheel and square pseudo-bearing thing)
Tape Dispenser, Automatic Tape Cutter by SINGH DESIGN | Download free STL model | Printables.com