HSW engraver mount (Arrowmax)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice mount to hang your arrowmax engraving tool onto a honeycomb storage wall.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a mount that fits the Arrowmax engraver (SGS mini). I'm not entirely sure, but I think it might fit some other engravers that use the same type of casing.
I printed it myself using Blue PLA+ from Elegoo.
Print settings:
- 0.6mm nozzle
- 0.3mm layer height
- 3 perimeters
- Brim, no supports
I designed this mount in two versions. The first is a mount that doesn't really allow you to customize the way you hang it, but it is printed in one piece for if you don't have glue.
The other version is printed in two parts, so that you can decide how you want to hang it. The downside to this is that you will have to use glue and you may have to draw some lines on the print to determine the center (I drew lines, but you can also eyeball it).
Please note that you will need to download and print BOTH the insert and the mount if you want to print it in two pieces, as they are separate files!!!
If you experience any problems or have suggestions to improve the part, please feel free to send me a message. I will be glad to help and will edit the design of the part.