HSW knife mount for Opinel N°09
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a mount for opinel N°09 for my HSW wall
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 176
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed a holder for Opinel No. 09 for my HSW wall. I hope it fits well. I have modified a few things since I printed it, because mine was quite tight and almost didn't come out. I made it a bit wider, so hopefully it will fit.
I made it 2 different ways, the first one is the complete mount including the hsw insert, the other way is by printing the holder/mount and the insert apart and using superglue to attach them to each other. I did it the second way as this is easier to print and also makes sure you don't require a lot of supports.
If you have any problems or suggestions, please let me know and I will be happy to modify the design for you.