Addon for H2D 4 in 1 adapter with spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An addon for my 4 in 1 spool holder for the H2D - adds a space for another adapter!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 616
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an addon part for my 4 in 1 Spool Holder mod available here:
https://www.printables.com/model/1282912-bambu-lab-h2d-4-in-1-adapter-with-spool-holder
It allows you to add another 4 in 1 adapter!
Instructions:
You will need 1 no. M4 machine screw with an 11-12mm thread and another Bambu 4 in 1 adapter.
I would recommend 60% sparse infill but it will probably be perfectly ok with the default 15%.
Fit the two parts together - they should push fit OK but I used superglue to lock them together. Then push fit the part onto the existing modded spool holder. I left mine just a friction fit for awhile whilst testing but eventually glued it down.