1 / 2
Euro coin holder, filament saver/fast printing — zdjęcie 1
1 / 2

Euro coin holder, filament saver/fast printing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Coin holder specifically designed to be easily 3D printed using spiralize/vase mode.

Ocena
0 / 5
Polubienia
2
Pobrania
48
Wydruki
0
Wyświetlenia
199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

This is a simple euro coin holder, designed specifically for spiralize (or vase) mode for saving material/time.

For the best results, print the model with a 0.4 nozzle, 0.2 layer thickness and 2mm thick solid bottom layer (ensure your solid bottom layer count is one layer thicker than the base itself).

Coins are arranged from left to right, starting with the 2€ coin and then decreasing in value. The slots gently hold each coin, letting you easily pull them out with one hand.

Tagi