1 / 2
Folding scalpel knife - mod for blade access and locking
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pocket scalpel knife mod to accommodate blade removal and locking mechanism. See original for blade holder.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Mod of the awesome original post here: https://www.printables.com/model/233942-pocket-scalpel-knife-folding-scalpel-knife-v1-for
I printed in PLA and PETG. Both seem to work fine but PETG seems more friendly on locking mechanism. The locking mechanism is somewhat springy and could probably use a different design to hold more firmly in place.
Changes include
- a notch on Part 1 for ease of access for adding/removing blade
- locking mechanism to hold blade open
- Swapped M3 screws to button head hex socket head (10mm long). Slightly sticks out instead of holding flush, but it is the only type of M3 I had on hand.