FLP-07 Goblin - Shell Lock Remix

Update 5/28/25 - realized i did the holster notch wrong, removing holster files until i get it right.

I really like the goblin but I also like how the yeethammer's shell insertion/ejection system works so i designed a catch to hold the shell in place until the front is closed. A pusher added to the grip releases the catch and pushes the shell up against the o-ring.

The pusher is also now pushed by a spring instead of elastic.

This shouldn't really affect performance at all, just a fun remix i did to help me get better at CAD.

Modified for the original grip and lynx grip remix, as well as notches to fit the sear in the original holster and belt loop holster remix.

Requires two springs, the barrel sear pivots on the existing screw that the front end pivots on.

Sear Spring

I used a pen spring (4mm od .4mm wd) cut down to ~10mm, similar to the spring used for the plunger sear. 

These are the springs i have that i cut down for various projects: https://www.amazon.com/Customized-Galvanizing-Compression-Diameter4mm-Diameter25mm/dp/B08P8Z1J5S/ref=sr_1_4 

This spring should also work if you don't want to cut it down, but i haven't specifically tested it: https://www.amazon.com/uxcell-0-4mmx4mmx10mm-Stainless-Compression-Springs/dp/B076M55S7F/ref=sr_1_4

Ejector Spring

Update: i find this spring to be best, it can be a little tight so you can cut a little off it if you like but tight is good because it needs to fight the air coming out of the plunger.

https://www.amazon.com/dp/B076LTYY5K

6mm OD,0.6mm Wire Size,50mm Free Length