Clip on clamp, with a ratating arm and adjustable height (for honecomb and zig-zag laser beds)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a heavy duty version on the clip on honeycomb bed clamp. It has a butterfly nut which makes it easy to setup.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 2 part print, where 1 section is the clip-on base and the 2nd is the arm, rest of the components can either be 3d printed or bought online to assemble the clamp. BOM and links are included later in the descriotion.
The clip-on section is a universal part (will remain same for different versions), where as the clamp arm is of custom lengths can be selected by the user according to their needs. .sldprt file of all the components will be included with the model for those who wish to customize it.
The clip section slides on the laser bed and can be tightened to secure it firmly. It also includes a clamp for an M6 bolt, which acts as a shaft for the clamp arm. A spring is placed between the base and the arm, which provides an adjustable height feature to the clamp.
BOM (qty/name/desc&dimension)
- 1 / Bolt M6 / Flat head non hardened (1.25")
- 2 / Bolt M3 / Hex head hardened (1" & ½")
- 1 / Spring / ID>6, wire dia.: 1-3, OD<12, length-16mm
- 1 / Butterfly(wing) nut M6 / standard
- 2 / Washers M6 / standard 1mm
I'd be happy to answer any questions and would appriciate valuable feedback that will help improve the design.