Bambu Lab AMS HT SKADIS Mount with T-Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA SKADIS Mount for the New Bambu Lab AMS HT
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 646
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a IKEA SKADIS Mount for the New Bambu Lab AMS HT
Thanks to @cyao for the original model! I added the part with the SKADIS T-Clips and removed his adapter.
It mounts the AMS HT sideways so it can be mounted on a IKEA SKADIS board next to the printer.
It fixes with the SKADIS T-Clips, i added five of them for higher strength when the AMS HT is loaded with a kilogram of filament.
Printed in PETG, but should also be possible in ABS or ASA, just be careful about material shrinking.
To print it in one piece it requires a bigger printplate like in the BambuLab H2D or the Prusa XL.
For smaller printbeds, just cut it in the slicer and add some dowels.
Pieces to print:
- 1x Bambu AMS HT Skadis Mount v3.stl
- 5x T-Clip for Painted Skadis.stl
My print settings:
- at least PETG
- 0,2mm layer height
- 2 walls
- 20% gyroid infill
Have fun with it!