1 / 1
Casing ring to use Seiko VH31 instead of NH35 — zdjęcie 1

Casing ring to use Seiko VH31 instead of NH35

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To replace a mechanical movement Seiko NH35 with a quartz movement Seiko VH 31 you can use this casing ring.

Ocena
0 / 5
Polubienia
6
Pobrania
205
Wydruki
0
Wyświetlenia
1118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

If you talk to a watchmaker about replacing a mechanical movement with a quartz movement, you will hear many reasons why this is not possible. The intended replacement may be too small, too big or require the dial feet at another position. However, if you want to swap your NH35 for a VH31 from Seiko Instruments Inc. / SII / Hattori / TMI you may be successful.

Your biggest challenge will be the hands. As with almost all parts of a watch, there are no standards for the diameters of the holes of the hour, minute and  second hands. The hands of the NH35 will not fit the VH31, so you should look for hands for the VH31 OR Mioyta 2035 or TMI PC 32. Fortunately, these three movements use the same values for the hour/minute/second hands: 1.20mm / .70mm / .17mm.

The model is a casing ring for VH31 and fits quite well. However, it is designed for a specific case and your case may be slightly different, although both are made for a mechanical NH35. It was printed with a 0.2 mm nozzle on a X1C.
 

Tagi