Bruel and Kjaer 2250 Sound Level Meter Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rugged box and insert for all 5 people in the world that use B&K 2250 sound level meters out on the road.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Required Hardware:
- 2250 box
- 6 x M3 x 30 mm screws (room for a 7th spare screw in the TPU insert)
- 5 mm EVA Foam for lid
- Calibrator box
- 6 x M3 x 30 mm screws
Materials/print settings:
- PETG - 6 walls, 3 layers base, 3 layers top, 15% gyroid infill
- 2250 box lid
- 2250 box base
- Calibator box lid
- Calibrator box base
- ASA
- Box Latch (this stops the latch from stretching over time but you could print this out of PLA or PETG with a few spares)
- TPU (98A) 2 walls, 3 layers base, 5 layers top, 8% gyroid infill, slim tree support under air tag holder
- 2250 insert box insert
The Story:
I work as an acoustic consultant and also work with the team to maintian and manage our equipment. Our team works in and around London we wanted a slim, protective solution that could be carried by all of our engineers on the tube (with bonus space for an apple airtag).
After trying and failing to find a good option I just took a load of measurements, photos and 3D scans of the sound level meter in a series of orientations with my phone, went home and did some recreational R&D. After a bit of back and forth now we have two small rugged boxes.