Holder for scale Oneblade QP2520/20R1 Phillips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because it's always useful to be able to scale while shaving! Be careful, she's been over-fertilized!
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 870
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- BSD License
This printable is currently only a 3D project. Use New version .STL !! .stp & Ligh only older version 😊 |
I'll rework this project in a little more detail this summer with additions for different Oneblades (which will allow for a smaller fanny pack or more portable accessories). Waiting for CAD models or measurements for modeling tools...
The QP-1924 series and similar sizes in particular (KarotBlade in process!)
Two versions only QP2520/20R1:
- BananaBlade Strong:
Built-in magnets, accessory slots.
- BananaBlade Light (only .step):
No built-in magnets, no accessory slots.
A Mini BananaBlade may be possible for both accessories and the Oneblade.
To open, see the top and bottom of the BananaBlade.
You have to glue them! ⬆⬇
Why are neodymium magnets so strong? Because there are no hinges and also because I had too many…
The .step file is provided for modification.
The lettering is as you wish; these are for informational purposes only, not for personal use, as the measurements are in my head!
| BananaBlade strong | Neodynium Magnets | 10x3mm | 11 |
| BananaBlade Light | Neodynium Magnets | 10x3mm | 8 |
Warning! The magnets built into .Strong are not optimized! |
For printing… And it's up to you to figure it out! 🫣 Thank you for getting back to me!
You can paint it to add details! I hesitated to add hollows for decorations (streaks or black/brown spots) for more realism.
Since I no longer have a working 3D printer (lack of time and motivation!), I couldn't actually check the measurements. I use Slicer and basic CAD software on Android, so please be careful!
The supports should definitely not be used if laid flat on the opening side.
Feel free to use the tool (Philips Oneblade Modeling Tool) and check out the other creations.
Original by Dewalt Banana.
Thank you!