CMF Phone 2 pro MIcroscope adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a screw-on chuck-like adaptor to use the CMF Phone 2 Pro camera for microscope image collection
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
General
Here is a chuck-like adaptor used to secure a CMF Phone 2 Pro to a microscope. The adaptor is designed so the camera lense is centered with the optical path of the microscope. Unfortunately I don't have the phone myself, so in the picture you can see the lens insert part that was provided for the contest as placeholder for where the rest of the phone should be.
The idea for this came from my own personnal habit of just snapping a picture through the microscope for quick day to day comparisons of cell culture, or to allow for image based bragging with my labmates when something decides to work. However, without an adaptor this can be quite tricky, as the optical path of the two devices must be aligned, and the distance from the phone to the microscope must be kept constant.
Besides, the use of phones for image collection and analysis in microscopy for more serious application has been a topic for quite some time now. The main advantage seems to be the omnipresence of smartphones all over the world, even in emerging regions, where the cost of computer based treatment of image (for diagnostic for example) could be a hurdle, as discussed in the following sources.
https://pmc.ncbi.nlm.nih.gov/articles/PMC7160027/
https://bmcinfectdis.biomedcentral.com/articles/10.1186/s12879-020-05453-1
Regarding this model in particular, it has been designed to fit a microscope for which the eye piece as a 42 diameter. Therefore the “chuck” has a diameter of 43 mm when completely loosened. The provided nut allows to tighten the chuck around the eye piece, maintining alignement of the optical path. When the chuck is tightened, it also allows to move the phone closer or further away from the eye piece. The back of the adaptor is designed to secure to the original lens mount of the CMF Phone, which keeps everything aligned without adjustments.
I guess this could be adapted to many different optical devices such as telescopes, binoculars…
Remix
Has I said above, this model has been designed for the microscope I have access to. However, I provided the models as f3d files so it shouldn't be too complicated to adapt. So please feel free to remix this !
Modifying the first sketch in the timeline should already allow you to change the diameter of the chuck and it's depth, which should be enough in most case.
For the nut, this is a bit less elegant I am afraid. SInce the model is basically a conical thread, I had to draw it myself, so it does not fit any standard threading. If the nut is to be redesigned, the step I recommend (and used myself) are :
-Open the f3d file for the nut_no_thread, make sure it is wide enough for size of your chuck
-Save as nut_no_thread STL
-Open the f3d file of the chuck, do the modifications that are required
-save as chuck-notched STL
- go back a few step in the timeline, and export an stl of the chuck without the vertical notches
-Save as chuck_no_notch STL
-Open any basic 3D modeling software, import both STL files : chuck_no_notch and nut_no_thread
-Align both models in x and y, put the nut_no_thread flat on the “ground” and put the chuck_no_notch on the ground too, the opening of the chuck should face the ground
-Lift nut_no_thread 1 mm above ground, and substract chuck_no_notch. This leave a perfect negative of the hread in the nut. deleted the disc that is now detached in the center of nut_no_thread
-increase the size of your freshly threaded nut to 101% or 102% depending on your printer to account for tolerences.
-Save as nut-threaded STL
-Print chuck_notched and nut_threaded
-Enjoy
Printing
I printed mine with 0.4 mm nozzle, 0.2 layer height (quality presets) on my MK3S+ using PLA. Infill was set to 15%, and I used an outside brim for adhesion (especially for the chuck). I also added a fuzzy skin modifier to the outside of the nut, for high perfomance grip.
Orientation is quite straightforwardly flat for the nut. I also added a modifier at the middle of the nut to have fuzzy skin to have a better grip. Honestly I am not quite sure it did much here. If you do so, make sure it is on the outer surface only, otherwise it will mess up the thread.
For the chuck, I printed with the opening of the chuck facing the plate (as shown in STL file), with supports inside. On the top side of the chuck, in the lens mount part, make sure not support is generated underneath the little tabs that secure in the mount. Those are tricky to remove and are not useful.