Clothespin basket holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple holders to suspend a clothespin basket to the clothes rack
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a foldable resin clothes rack that goes outside.
To store the clothespin, I bought a basket to put them in.
At first, I just tied the basket to the rack, but sometime I needed to fold the rack and I got to untied the basket and it was annoying.
So I modeled those holder in Freecad (1.1 dev version) and voilà :)
I recommend to print them with supports, 2 walls and 13% cubic infil.
That shoud be enough, as the basket and clothespin are not that heavy.
I also put the Freecad file so you could adapt the model to your needs.
I used some variables located in the ‘vv’ sheet.
I don't guarantee that the model will resists parameter changes though…
Hope that it'll be useful to someone out there :)