1 / 3
Treasure Chest
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is based on Brent's Treasure Chest. I needed a version that had stronger hinges and could be printed without supports, so I created my own version from the ground up.
I printed it with a 0.6 nozzle at a 0.25 layer height and 40% infill with no issues. PETG recommended.
The multicolour version was printed with a 0.4 nozzle at a 0.2 layer height and PLA (see file).
You need to print a second set of pins for the hinges. The lid top you can glue on afterwards. The hinge is press fit but you can also glue it.
