Horizontal extruded aluminum Y axis motor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of a design for mounting the Y axis motor on an Ender 3
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The Y axis motor mount on my Ender 3 v2 snapped off, and my printer had a Y axis linear rail kit installed with screw holes for 20 x 40 extruded aluminum instead of 40 x 40. Also the original kit had the belt too low and was slightly rubbing on the linear rail. I modified this excellent design I found to fix these problems.
I printed it in PCTG with somewhere around 20% adaptive cubic infill. Although increasing the number of perimeters seems to be better for strength than increasing the infill.
Update: I added the mount for an Ender 3 endstop switch. The screw holes should print with threads.