Prusa I3 MK2 Extruder Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a extruder connector KIT for the original Prusa I3 MK2.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 3705
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a extruder connector KIT for the original Prusa I3 MK2.
it is simply a junction board to quickly disconnect the extruder without having to remove the components one by one.
And without having any left free from Rambo.
Print instructions
Supplies
You need to buy electrical component to realised this mod.
2x SMD Led 3528 (colors according to your choice)
2X Resistance 1/4W 580O
8x 50-57-9402_CRIMP_HOUSINGS
2x 50-57-9403_CRIMP_HOUSINGS
2x 50-57-9404_CRIMP_HOUSINGS
8x 70553-0001_PCB_HEADERS
2x 70553-0002_PCB_HEADERS
2x 70553-0003_PCB_HEADERS
2x 39520-0002_TERMINAL_BLOCKS
2x 39522-0002_TERMINAL_BLOCKS
30x 16-02-1109_CRIMP_TERMINALS
Wiring works
It will be necessary to make them yourself electronic junction board.
You will need to cut and lengthen the cables origins.
Changing your printer is your responsibility. Improper wiring can cause irreversible damage.
If you do not have the required skills, help you done or done anything.
Beware wiring, polarities and warning to electrocutions.