Holo top - easy to print spinning top(over 180s spinning)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stable, long-running top.
- Ocena
- 4,6 / 5
- Polubienia
- 20
- Pobrania
- 158
- Wydruki
- 6
- Wyświetlenia
- 1416
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
This is a stable, long-running top.
The center of gravity is perfectly aligned(0.009mm) and technology has been incorporated to reduce aerodynamic drag.
!!Emergency Fix!!
Conventional rods are not properly toleranced.
I provide a modified version.
Perfect Balance

To provide perfect performance, the center of gravity is aligned to within 0.009mm.
Also, the rod is hollowed out for low-speed stability of the top.

Moreover, to prevent warping, a 5mm(0.2"-not tested) steel ball was used instead of a print with errors.
It uses only one arm to minimize air resistance.
Stability

Thanks to the perfect alignment, the top is perfectly stationary and moves.
Notice
- The rod can be 0.2-0.4mm (0.6 max) away from the rotor, this is normal.(Picture below)
- Only use solid models if rods do not print properly! Solid rods reduce rotational stability.
- Set the density to 100% but the number of walls to 2! More walls increase the difficulty of printing.
- Happy printing:)
