Stacking Connector for Gorilla Z-Beam Steel Shelving
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plastic alignment connectors for joining the top and bottom halves of Gorilla Z-Beam Steel Shelving units.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
I had 3 sets of these Gorilla Z-Beam shelves, but lost some of the connectors during a move. I quickly designed and printed off a batch of these to get them set up. Hope these are useful to anybody who misplaces stuff like I do!
I printed these in the orientation shown, with support interface material. These should also be printable with regular support material and a little bit of patience to remove. I know it won't be perfectly pretty what with all the overhangs, but I think that's the orientation that makes the most sense.
If you lost your feet for your shelves, you could also just bisect this model horizontally and print that to make a set of feet.