Frosthaven Summons: Defense Grid

Here's my model for the Frosthaven summons, the Defense Grid (artwork at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-defense-grid-front.png).  I had an ambitious idea, what if we could actually see the traps that this guy dispenses… and what if they were actually stored inside of it and could then be placed on the table?  So, that's what I made!  To get it working, it's broken up into several parts:

Defense Grid - Main.stl

This is the main body of the model, and it needs a lot of support.  Fortunately, removing that support was actually really easy, so although it's intimidating, it's not too bad!

Defense Grid - Lid.stl

This is the lid that goes on the top of it.  It's arguably the part that is most recognizable from the artwork ;)

Defense Grid - Trap.stl

These are the traps that I sized the model to contain.  It's built to hold six of them.  Why six?  Well, the height worked well for the table and so much of Gloomhaven is sets of six that it just all seemed to naturally come together that way!

Defense Grid - Lifter-A.stl and Defense Grid - Lifter-B.stl

These two pieces get glued together to form a lifter to help gets traps out of the main body.  The little “tail” bit sticks out the back of the model and the traps rest on the platform.  These are the only pieces that need to be glued together.  Please note that part B has a little .2 mm tall circle off one end; that's there for printing purposes to help that thin part avoid curling up during printing and should be trimmed off prior to use.

As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!