1 / 8
CMF Phone 2 Pro - Fusion 360 - universal cover — zdjęcie 1
1 / 8

CMF Phone 2 Pro - Fusion 360 - universal cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original model only provided stl/3mf/mesh files of the cover for the CMF Phone 2 Pro. This is a Fusion 360 version!

Ocena
5 / 5
Polubienia
39
Pobrania
233
Wydruki
3
Wyświetlenia
2093
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I began designing my CMF Phone 2 Pro case based on the provided mesh. But it sucked hard ;) Bad performance and issues with the converted Object…

Additionally, after test printing, I discovered that the large screw would not fit (it was too short), so I wanted to replace this part with a simple 2.5x4mm screw.

That is why I decided to design a version of the cover in Fusion 360.

 

Also works as a simple back cover ;)

You will need a 2.5x4mm screw!

 

Some of the dimensions in the original drawing seem to be wrong. 

 

Update! 

Thanks to https://www.printables.com/@josiahkeeler_2167106

He figured out that the magnets needed some tweaks. 

I just updated the files accordingly!