Kobra S1 Bed Brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support brace to improve rigidity of the Kobra S1 bed frame.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 327
- Wydruki
- 0
- Wyświetlenia
- 2489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A frame to stiffen the bent sheet metal bed of the Kobra S1. I noticed that my bed was tilting in the back left corner during automatic leveling, so I tried to reinforce it a bit. I replaced the original four screws of the magnetic bed with M4x25 screws, added the brace underneath the metal, and secured it with M4 nuts. It didn’t make a huge difference, but it’s no longer tilting like it did before.
Printsettings:
- I printed it in PETG-CF
- 0.2mm layer height
- eight walls
- 10% Gyroid infill
Stay tuned for updates, and feel free to share your feedback for an enhanced 3D printing experience.
If you appreciate what I've designed so far, feel free to buy me a coffee!
https://www.paypal.me/OrzOrzOrzPP
https://www.buymeacoffee.com/orzorzorz