Avengers Tower Echo Dot stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE 4/13/19 added Echo Dot gen 2 version Avengers Tower modified to hold an Amazon Echo Dot gen 2 or 3. Includes…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 226
- Wydruki
- 1
- Wyświetlenia
- 1800
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 4/13/19 added Echo Dot gen 2 version
Avengers Tower modified to hold an Amazon Echo Dot gen 2 or 3.
Includes cable pass-through and management.
There are 2 models for the gen 3, a truncated 200mm-tall version that I printed on my Anycubic I3 Mega, and a 250mm (near-full-size) for those with larger printers.
For the gen 2 there is only the 200mm-tall version.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
15% Triangles
Filament: StrongHero3D PLA New Silver
Notes:
Print with supports (touching build plate). Make sure to use a support brim and glue stick, because I had 2 failures due to the support structure coming loose halfway through the print.
Took ~40 hours for a successful print.Category: Decor