Philips Senseo HD6563/00R1 Lock Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lock handle for Philips Senseo HD6563/00R1. Restores secure closure for proper brewing performance.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Lock Handle for Philips Senseo HD6563/00R1
When my original lock handle broke, I designed this replacement. It’s very similar to the original, with a few improvements:
Flat top surface for easier, support-free printing
Reinforced stand for better durability
Slightly adjusted shapes due to lack of precise measurements
Installation is easier than it looks:
Just unclip the top cover, remove the spout, release the white locking mechanism (first from the back slots, then from the handle), swap in the new handle, and reassemble in reverse order. Then power on and enjoy your coffee!
Printing tip:
Lay it flat to avoid supports—though light supports around the cylindrical ends can improve print quality. Works well either way.
Print settings:
Printer brand: Creality
Printer: Ender-3 v2
Rafts: Doesn't Matter
Supports: Doesn't Matter
Resolution: 0.16
Infill: 25%
Filament brand: Doesn't Matter
Filament material: PLA
Notes: Lay the part flat on the print bed to minimize the need for supports. You may only need light supports for the cylindrical ends. I tested both with and without supports—both worked well, though the supported version came out slightly cleaner.