1 / 2
Philips Vacuum FC9353/FC9349/FC9332 Back Wheel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement back wheel for Philips vacuum models FC9353, FC9349, and FC9332. Restores smooth movement and stability.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Installation Instructions: Back Wheel for Philips FC9353 / FC9349 / FC9332
- Remove the Broken Wheel:
Use a flathead screwdriver to gently pry off the damaged or worn-out wheel from the axle. - Clean the Axle:
Remove any dust, debris, or remaining plastic from the axle to ensure a snug fit for the new wheel. - Align the Replacement Wheel:
Position the printed wheel on the axle, ensuring the center hole lines up correctly. - Push or Tap into Place:
Firmly press the wheel onto the axle. If it's tight, lightly tap it into place with a rubber mallet or similar tool. - Check Rotation:
Spin the wheel by hand to confirm smooth movement and secure attachment.