Fully 3D printed heat set insert press and drilling press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D printed multifunction press for drilling and heat set inserts that needs only 1 screw and nut
- Ocena
- 4,75 / 5
- Polubienia
- 51
- Pobrania
- 244
- Wydruki
- 3
- Wyświetlenia
- 1342
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Fully 3D printed multifunction press for drilling with dremel or other mini drills and heat set inserts with support of generic soldering iron with D17 mm body or TS101 soldering iron.
Not recommended to print everything in PETG, it does not slide smoothly and requires dry lubricant. PLA on PETG slides smoothly.
A blank adapter file is included so you can customize it for your specific tool.
For more dimensionally accurate column and carriage you can turn on “reverse on even” and set “reverse threshold” to 0. Additionally you can set “walls printing order” to “outer-inner” or “inner-outer-inner”.
All parts can be printed with 2 perimeters and 10% infill, except the gear, arm, and tensioner — these should be printed more rigidly. The top and bottom shells of the base should be at least 1.5 mm thick.
For assembly you will need only one M6 screw with a nut for tensioner and glue if connections are not tight enough. For column you can drill holes for securing it to the base with self-tapping screws. If table is curved after printing you can secure it to the base with double sided tape.