Ground Wire Adapter For Goozeezoo Antenna
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your ground plane wires attached with this quick print adapter for the Goozeezoo portable vertical antenna.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I picked up the Goozeezoo portable vertical antenna (https://amzn.to/4mBMlO7) after watching Coastal Waves and Wires video about it (video below) and found that my ground wires really would not stay in my antenna at all. This is an easy problem to fix when you have a 3D printer though! A quick model in Onshape and it was good on the first go.
I had no problem dialing in this antenna in for great coverage on 20 meters without the need for an ATU once I was able to keep my ground wires in place. Simply print the ring, slide it on the base of the antenna and plug in the wires into the ring. The holes in the ring are designed to match up with the holes on the base so you get good contact. I added 1 3mm set screw (14mm or greater screw needed) to really lock it in but honestly, once you get the plugs aligned with the holes on the base, you really don't need it. I printed mine in PETG so it wouldn't melt outside in the sun.
Have fun with this and I hope to see you on the air, 73s!