Voron 0.1/0.2 poop basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple poop basket/bucket for use in Voron 0.1 / 0.2 printers when using AMS systems purging filament colors with poops.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Simple printable poop basket/bucket for use in Voron 0.1 / 0.2 printers when using AMS systems purging filament colors with poops. This keeps things tidy in the printer during prints … mostly prevents stuff from getting all over the place.
Can be printed on the Voron 0 itself, on the bottom side at 45 diagonal angle to the print bed to keep some clearance on all sides. No supports are needed. Feet should be printed on their sides. The one in the picture was printed using eSUN ABS+.
Uses 4 6x3mm magnets to keep the basket connected to the 2 clickable feet.
The attached F3D / STEP files include the full printer for ease of modelling. Those are under GPL-3 license from the Voron Design project: https://github.com/VoronDesign/Voron-0 .
The basket and feet themselves are original models.