1 / 6
19" Rackmount Distance — zdjęcie 1
1 / 6

19" Rackmount Distance

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Distanzhalterungen für 19" Schränke (1HE) / Spacer brackets for 19" cabinets (1HE)

Ocena
5 / 5
Polubienia
6
Pobrania
20
Wydruki
1
Wyświetlenia
214
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

English below….

Deutsch:

Ich hatte das Problem dass das Patchpanel zu nahe an die Tür montiert wurde, sodaß die Gefahr bestand die Patchkabel abzuknicken. Ich zeichnete Abstandshalter mit 5cm sodaß mehr Platz für die Kabel entsteht und die Tür ordentlich geschlossen werden kann. Sie lassen sich leicht montieren (erst die Schrauben am Panel reinschrauben) und anschliessend die vorderen reindrehen.

Ich druckte sie in ASA (wegen der Belastung), sollte aber mit guter Layerhaftung auch mit PETG klappen.

Pro Abstandshalter braucht man:

  • 4 M6-Muttern
  • 4 M6-Schrauben 25mm

English:

I had the problem that the patch panel was mounted too close to the door, which meant there was a risk of kinking the patch cables. I drew 5cm spacers to create more space for the cables and allow the door to close properly.

They are easy to install (first screw in the screws on the panel) and then screw in the front ones.

I printed them in ASA (due to the stress), but with good layer adhesion, it should also work with PETG.

For each spacer, you need:

  • 4 M6 nuts
  • 4 M6 25mm screws