BTT Eddy Slim Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I changed it so that the plate does not receive direct heat from the hotend, since it is now even closer.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I like the original model, but I didn't want the Eddy board to receive direct heat from the hotend, so I closed the front air intakes. Since the recommended mounting is for the sensor facing the hotend, I had to align the countersink holes for correct mounting on the extruder.
I needed this model because I'm going to test Eddy-NG, where the Eddy Probe needs to be 1.8mm from the table (with the shell), and without the shell it's 3mm away, without the risk of colliding with anything. I also got more space in the X carriage movement.
Before I used M3x20mm screws, now M3x14mm.