1 / 3
Stand / Charger for my sons and their iPhone 6S. — zdjęcie 1
1 / 3

Stand / Charger for my sons and their iPhone 6S.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand and/or Charger for my sons' iPhone 6S Easy print, no brims, supports needed.

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
232
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Stand / Charger for my sons and their iPhone 6S.

I use Elough charging cable and magnetic pin from here: https://www.aliexpress.com/item/32948923029.html

You don't need anything but slide it in and bend/secure the cable at the channel on bottom side of the stand.

I used generic PETG

layer heigth: 0.2 or 0.15 recommended

no supports

no brims

just a tiny overhang

 

Enjoy ;)

Tagi