1 / 7
fully 3d printed dual and single axle RC beamng pigeon — zdjęcie 1
1 / 7

fully 3d printed dual and single axle RC beamng pigeon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2212 motor, 120 A esc, 9g servo, use any filament for any part, its designed and tested to strong wiht only pla and tpu.

Ocena
0 / 5
Polubienia
6
Pobrania
15
Wydruki
0
Wyświetlenia
218
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

https://youtu.be/s_dC-w5gyA0?si=XXUXzHBmlcngIpb-

please do post pictures of makes and remixes i would love to see them and also please tell me if theres any modifications i should make for durability or handling.

2212 motor, 120 A esc, 9g servo, 7.4v battery of any size, you will need a kit of assorted metric screws, from m2.5 to m5, for the front suspension in this design you will need some 20mm springs that retract instead of push away, the ones with hooks on the end.

 use any filament for any part, its designed and tested to be strong with only pla and tpu but my friend had good results from using carbon fiber pla for the front suspension.

Tagi